Loading
FORTA-FI® - Dense Graded HMA
The Ohio Department of Transportation used FORTA-FI® to reinforce portions of the State Route-13 repaving project south of Mansfield, Ohio.
FORTA-FI® - Dense Graded HMA
Adams Township in beautiful Darke County, Ohio specified FORTA-FI ® fiber-reinforcement for the asphalt used in their 2012 Paulin Road rehabilitation project.
FORTA-FI® - Dense Graded HMA
FORTA-Fl® for asphalt was selected to reinforce the pavement on this short connector street in a heavy industrial area in the City of Painesville.
FORTA-FI® - Dense Graded HMA
The city of Willard, Ohio used FORTA-FI® in their surface overlay as a replacement for polymer modified asphalt on the Keefer Street repaving project in September of 2012.
FORTA-FI® - Dense Graded HMA
The Lake County Engineer’s office added FORTA-FI® to the asphalt used on the resurfacing project on beautiful Hoose Road. This scenic residential roadway was reinforced with 3/4“ HMA fiber to provide three-dimensional strength to the asphalt overlay.
FORTA-FI® - Dense Graded HMA
Many cities and towns across the country are making FORTA-FI® a regular part of their street maintenance programs. The City of Blossoms elected to use FORTA-FI® in a 1”. thin-overlay project in the heart of downtown Willard.
FORTA-FI® - Dense Graded HMA
FORTA-FI® fiber-reinforcement for asphalt was specified by the City of Ashland for a high traffic roadway overlay in the downtown business district.
FORTA-FI® - Dense Graded HMA
The Catawba Shores Condominium Association, whose property sits on the Lake Erie shoreline in Port Clinton, OH, chose FORTA-FI® to three-dimensionally reinforce their new parking lot.
FORTA-FI® - Dense Graded HMA
A three lane test section was placed using a PG76-22 polymer modified oil. The left lane was the control with no fiber.
FORTA-FI® - Dense Graded HMA
Ogden Avenue in downtown Las Vegas receives a high volume of bus traffic. When it was time to repair the pavement in early 2013, FORTAfied® asphalt was used for the top 2.5” lift of a new 5” asphalt concrete section, constructed over 12” of new base.
FORTA-FI® - Dense Graded HMA
FORTA-FI® was used in a 7 cm (2.75”) base and a 4 cm (1.5”) wearing course on a steep, high volume, heavy truck access road. On the edge of a new residential project right next to the asphalt plant - asphalt mix is placed on compacted subgrade.
FORTA-FI® - Dense Graded HMA
On request of RSD (Czech National Road Administration) a FORTA-FI® reinforced asphalt mix on a roundabout where two main roads (one from Prague and the other one connecting Kolin to Prague – Hradec motorway) meet and enter the town of Kolin.
FORTA-FI® - Dense Graded HMA
The mix with fibers was used for a temporary repair of Apron / TWY where an increased traffic is expected during the repairs / reconstructions of the adjacent areas.
FORTA-FI® - Dense Graded HMA
The Mississippi DOT was looking to repair an asphalt overlay on a concrete base. In their efforts to choose the best reinforcement possible, MDOT decided to do a trial project with FORTA-FI®.
FORTA-FI® - Dense Graded HMA
The City of Dearborn Heights, Ml opted to add the strength and durability of FORTA-FI® for the asphalt produced for the Hass Street repaving project.
FIBER EXPERTS ON STAFF
Ready to Answer Questions
& Aid in Technical Support